top image

Building Access

The building is equipped with the following access control systems:

  1. Card Access System
    1. Your access card is required to gain building access from 6:00 p.m. until 6:30 a.m. For the garage and shuttle elevators, card readers are located inside each elevator cab adjacent to the floor button panel. To activate an elevator, place your card in front of the reader until you hear a beep noise, then press the button for the floor you are authorized to access can be pushed and activated. After the elevator travels to the requested floor, the access system will reset, requiring use of an access card again for entry to another floor. Access will be restricted to only your Company’s floor(s) as authorized by your employer.
    2. An access card is not required to exit any floor. The elevators will automatically respond to a call, as normal, by pushing the call button on the floor which will take you to ground Level 1.
    3. Each access card has a distinct number. If your card is lost or stolen, please report it immediately to the Property Management Office so this card can be voided and a new replacement card can be issued.
  2. Security Console
    The security console, located in the lobby of the building is open 24 hours per day, 7 days per week. The console is a control point for all building surveillance, alarm monitoring and communication equipment. If security personnel are not present at the console, they are located somewhere on the property and tending to security matters. Please use the phone number posted at the console to contact the Security Officer.
  3. Camera Surveillance
    Cameras monitor ground floor freight elevator lobby and building entrances after-hours.